Fully Automatic Two Wire Joint Crimping Machine
Product Categories: Automatic Crimp Machine
Model: XC-8035
Brand: ZHAOZHUANG
Online InquiryThis is a fully automatic two-wire combined crimping terminal machine. There are 2 sets of independent wire entry mechanisms and 2 terminal crimping stations on the machine.Therefore, it supports the combination of two wires with different wire diameters to crimp two different terminals. After cutting and stripping the wires, one end of the two wires can be combined and crimped into one terminal, and the other two ends of the wires can also be crimped to difterent terminals, The machine has a buit-in rotation mechanism, and the two wires can be rotated 90 degrees after they are combined, so they can be crimped side by side or stacked up and down.
| Model | XC-8035 |
| Applicable wire range | AWG30-AWG14 |
| Stripping length | Front: 0.5-8mm End: 0.1-10mm |
| Cut precision | ±0.2 mm+L*0.002mm (L=100mm) |
| Cutting length | 41-99999mm |
| Capacity | 3500pcs/hour (L=50-100mm) |
| Crimping force | 2.0T |
| Stroke | 30mm |
| Air pressure | 0.5-0.7Mpa |
| Cutting depth | Max. 5.5mm |
| Applicators | OTP applicator |
| Detection | Low air pressure ,Wire run-out, Wire overload, Terminal run-out,Terminal overload, Crimp error |
| Power | 220V/110V/50/60HZ |
| Dimension | 750*1000*1800mm |
| Weight | 500KGS |
+86-13656777668
